| Main index | Section 3 | Options |
| archive_write_set_filter_option(),
archive_write_set_format_option()
Specifies an option that will be passed to the currently-registered
filters (including decompression filters) or format readers.
If option and value are both NULL, these functions will do nothing and ARCHIVE_OK will be returned. If option is NULL but value is not, these functions will do nothing and ARCHIVE_FAILED will be returned. If module is not NULL, option and value will be provided to the filter or reader named module. The return value will be either ARCHIVE_OK if the option was successfully handled or ARCHIVE_WARN if the option was unrecognized by the module or could otherwise not be handled. If there is no such module, ARCHIVE_FAILED will be returned. If module is NULL, option and value will be provided to every registered module. If any module returns ARCHIVE_FATAL, this value will be returned immediately. Otherwise, ARCHIVE_OK will be returned if any module accepts the option, and ARCHIVE_FAILED in all other cases. | |
| archive_write_set_option() | |
| Calls archive_write_set_format_option(), then archive_write_set_filter_option(). If either function returns ARCHIVE_FATAL, ARCHIVE_FATAL will be returned immediately. Otherwise, the greater of the two values will be returned. | |
| archive_write_set_options() | |
|
options
is a comma-separated list of options.
If
options
is
NULL
or empty,
ARCHIVE_OK
will be returned immediately.
Individual options have one of the following forms: | |
| option=value | The option/value pair will be provided to every module. Modules that do not accept an option with this name will ignore it. |
| option | The option will be provided to every module with a value of "1". |
| !option | The option will be provided to every module with a NULL value. |
| module:option=value , module:option , module:!option | As above, but the corresponding option and value will be provided only to modules whose name matches module. |
| Filter b64encode | |
| mode | The value is interpreted as octal digits specifying the file mode. |
| name | The value specifies the file name. |
| Filter bzip2 | |
| compression-level | The value is interpreted as a decimal integer specifying the bzip2 compression level. Supported values are from 1 to 9. |
| Filter gzip | |
| compression-level | The value is interpreted as a decimal integer specifying the gzip compression level. Supported values are from 0 to 9. |
| timestamp | Store timestamp. This is enabled by default. |
| Filter lrzip | |
| compression=type | Use type as compression method. Supported values are "bzip2", "gzipi", "lzo" (ultra fast), and "zpaq" (best, extremely slow). |
| compression-level | The value is interpreted as a decimal integer specifying the lrzip compression level. Supported values are from 1 to 9. |
| Filter lz4 | |
| compression-level | The value is interpreted as a decimal integer specifying the lz4 compression level. Supported values are from 0 to 9. |
| stream-checksum | Enable stream checksum. This is enabled by default. |
| block-checksum | Enable block checksum. This is disabled by default. |
| block-size | The value is interpreted as a decimal integer specifying the lz4 compression block size. Supported values are from 4 to 7 (default). |
| block-dependence | Use the previous block of the block being compressed for a compression dictionary to improve compression ratio. This is disabled by default. |
| Filter lzop | |
| compression-level | The value is interpreted as a decimal integer specifying the lzop compression level. Supported values are from 1 to 9. |
| Filter uuencode | |
| mode | The value is interpreted as octal digits specifying the file mode. |
| name | The value specifies the file name. |
| Filter xz | |
| compression-level | The value is interpreted as a decimal integer specifying the compression level. Supported values are from 0 to 9. |
| threads | The value is interpreted as a decimal integer specifying the number of threads for multi-threaded lzma compression. If supported, the default value is read from lzma_cputhreads(). |
| Filter zstd | |
| compression-level | The value is interpreted as a decimal integer specifying the compression level. Supported values depend on the library version, common values are from 1 to 22. |
| Format 7zip | |
| compression | The value is one of "store", "deflate", "bzip2", "lzma1", "lzma2" or "ppmd" to indicate how the following entries should be compressed. Note that this setting is ignored for directories, symbolic links, and other special entries. |
| compression-level | The value is interpreted as a decimal integer specifying the compression level. Values between 0 and 9 are supported. The interpretation of the compression level depends on the chosen compression method. |
| Format bin | |
| hdrcharset | The value is used as a character set name that will be used when translating file names. |
| Format gnutar | |
| hdrcharset | The value is used as a character set name that will be used when translating file, group and user names. |
| Format iso9660 - volume metadata | These options are used to set standard ISO9660 metadata. |
| abstract-file=filename | The file with the specified name will be identified in the ISO9660 metadata as holding the abstract for this volume. Default: none. |
| application-id=filename | The file with the specified name will be identified in the ISO9660 metadata as holding the application identifier for this volume. Default: none. |
| biblio-file=filename | The file with the specified name will be identified in the ISO9660 metadata as holding the bibliography for this volume. Default: none. |
| copyright-file=filename | The file with the specified name will be identified in the ISO9660 metadata as holding the copyright for this volume. Default: none. |
| publisher=filename | The file with the specified name will be identified in the ISO9660 metadata as holding the publisher information for this volume. Default: none. |
| volume-id=string | The specified string will be used as the Volume Identifier in the ISO9660 metadata. It is limited to 32 bytes. Default: none. |
| Format iso9660 - boot support | These options are used to make an ISO9660 image that can be directly booted on various systems. |
| boot=filename | The file matching this name will be used as the El Torito boot image file. |
| boot-catalog=name | The name that will be used for the El Torito boot catalog. Default: boot.catalog |
| boot-info-table | The boot image file provided by the boot=filename option will be edited with appropriate boot information in bytes 8 through 64. Default: disabled |
| boot-load-seg=hexadecimal-number | The load segment for a no-emulation boot image. |
| boot-load-size=decimal-number | The number of "virtual" 512-byte sectors to be loaded from a no-emulation boot image. Some very old BIOSes can only load very small images, setting this value to 4 will often allow such BIOSes to load the first part of the boot image (which will then need to be intelligent enough to load the rest of itself). This should not be needed unless you are trying to support systems with very old BIOSes. This defaults to the full size of the image. |
| boot-type=value | Specifies the boot semantics used by the El Torito boot image: If the value is fd, then the boot image is assumed to be a bootable floppy image. If the value is hd, then the boot image is assumed to be a bootable hard disk image. If the value is no-emulation, the boot image is used without floppy or hard disk emulation. If the boot image is exactly 1.2MB, 1.44MB, or 2.88MB, then the default is fd, otherwise the default is no-emulation. |
| Format iso9660 - filename and size extensions | Various extensions to the base ISO9660 format. |
| allow-ldots | If enabled, allows filenames to begin with a leading period. If disabled, filenames that begin with a leading period will have that period replaced by an underscore character in the standard ISO9660 namespace. This does not impact names stored in the Rockridge or Joliet extension area. Default: disabled. |
| allow-lowercase | If enabled, allows filenames to contain lowercase characters. If disabled, filenames will be forced to uppercase. This does not impact names stored in the Rockridge or Joliet extension area. Default: disabled. |
| allow-multidot | If enabled, allows filenames to contain multiple period characters, in violation of the ISO9660 specification. If disabled, additional periods will be converted to underscore characters. This does not impact names stored in the Rockridge or Joliet extension area. Default: disabled. |
| allow-period | If enabled, allows filenames to contain trailing period characters, in violation of the ISO9660 specification. If disabled, trailing periods will be converted to underscore characters. This does not impact names stored in the Rockridge or Joliet extension area. Default: disabled. |
| allow-pvd-lowercase | If enabled, the Primary Volume Descriptor may contain lowercase ASCII characters, in violation of the ISO9660 specification. If disabled, characters will be converted to uppercase ASCII. Default: disabled. |
| allow-sharp-tilde | If enabled, sharp and tilde characters will be permitted in filenames, in violation if the ISO9660 specification. If disabled, such characters will be converted to underscore characters. Default: disabled. |
| allow-vernum | If enabled, version numbers will be included with files. If disabled, version numbers will be suppressed, in violation of the ISO9660 standard. This does not impact names stored in the Rockridge or Joliet extension area. Default: enabled. |
| iso-level | This enables support for file size and file name extensions in the core ISO9660 area. The name extensions specified here do not affect the names stored in the Rockridge or Joliet extension areas. |
| iso-level=1 | The most compliant form of ISO9660 image. Filenames are limited to 8.3 uppercase format, directory names are limited to 8 uppercase characters, files are limited to 4 GiB, the complete ISO9660 image cannot exceed 4 GiB. |
| iso-level=2 | Filenames are limited to 30 uppercase characters with a 30-character extension, directory names are limited to 30 characters, files are limited to 4 GiB. |
| iso-level=3 | As with iso-level=2, except that files may exceed 4 GiB. |
| iso-level=4 | As with iso-level=3, except that filenames may be up to 193 characters and may include arbitrary 8-bit characters. |
| joliet | Microsoft's Joliet extensions store a completely separate set of directory information about each file. In particular, this information includes Unicode filenames of up to 255 characters. Default: enabled. |
| limit-depth | If enabled, libarchive will use directory relocation records to ensure that no pathname exceeds the ISO9660 limit of 8 directory levels. If disabled, no relocation will occur. Default: enabled. |
| limit-dirs | If enabled, libarchive will cause an error if there are more than 65536 directories. If disabled, there is no limit on the number of directories. Default: enabled |
| pad | If enabled, 300 kiB of zero bytes will be appended to the end of the archive. Default: enabled |
| relaxed-filenames | If enabled, all 7-bit ASCII characters are permitted in filenames (except lowercase characters unless allow-lowercase is also specified). This violates ISO9660 standards. This does not impact names stored in the Rockridge or Joliet extension area. Default: disabled. |
| rockridge | The Rockridge extensions store an additional set of POSIX-style file information with each file, including mtime, atime, ctime, permissions, and long filenames with arbitrary 8-bit characters. These extensions also support symbolic links and other POSIX file types. Default: enabled. |
| Format iso9660 - zisofs support | The zisofs extensions permit each file to be independently compressed using a gzip-compatible compression. This can provide significant size savings, but requires the reading system to have support for these extensions. These extensions are disabled by default. |
| compression-level=number | The compression level used by the deflate compressor. Ranges from 0 (least effort) to 9 (most effort). Default: 6 |
| zisofs | Synonym for zisofs=direct. |
| zisofs=direct | Compress each file in the archive. Unlike zisofs=indirect, this is handled entirely within libarchive and does not require a separate utility. For best results, libarchive tests each file and will store the file uncompressed if the compression does not actually save any space. In particular, files under 2k will never be compressed. Note that boot image files are never compressed. |
| zisofs=indirect | Recognizes files that have already been compressed with the mkzftree utility and sets up the necessary file metadata so that readers will correctly identify these as zisofs-compressed files. |
| zisofs-exclude=filename | Specifies a filename that should not be compressed when using zisofs=direct. This option can be provided multiple times to suppress compression on many files. |
| Format mtree | |
| cksum, device, flags, gid, gname, indent, link, md5, mode, nlink, rmd160, sha1, sha256, sha384, sha512, size, time, uid, uname | Enable a particular keyword in the mtree output. Prefix with an exclamation mark to disable the corresponding keyword. The default is equivalent to "device, flags, gid, gname, link, mode, nlink, size, time, type, uid, uname". |
| all | Enables all of the above keywords. |
| use-set | Enables generation of /set lines that specify default values for the following files and/or directories. |
| indent | XXX needs explanation XXX |
| Format newc | |
| hdrcharset | The value is used as a character set name that will be used when translating file names. |
| Format odc | |
| hdrcharset | The value is used as a character set name that will be used when translating file names. |
| Format pwb | |
| hdrcharset | The value is used as a character set name that will be used when translating file names. |
| Format pax | |
| hdrcharset | The value is used as a character set name that will be used when translating file, group and user names. The value is one of "BINARY" or "UTF-8". With "BINARY" there is no character conversion, with "UTF-8" names are converted to UTF-8. |
| xattrheader | When storing extended attributes, this option configures which headers should be written. The value is one of "all", "LIBARCHIVE", or "SCHILY". By default, both "LIBARCHIVE.xattr" and "SCHILY.xattr" headers are written. |
| Format ustar | |
| hdrcharset | The value is used as a character set name that will be used when translating file, group and user names. |
| Format v7tar | |
| hdrcharset | The value is used as a character set name that will be used when translating file, group and user names. |
| Format warc | |
| omit-warcinfo | Set to "true" to disable output of the warcinfo record. |
| Format xar | |
| checksum=type | Use type as file checksum method. Supported values are "none", "md5", and "sha1" (default). |
| compression=type | Use type as compression method. Supported values are "none", "bzip2", "gzip" (default), "lzma" and "xz". |
| compression_level | The value is a decimal integer from 1 to 9 specifying the compression level. |
| toc-checksum=type | Use type as table of contents checksum method. Supported values are "none", "md5" and "sha1" (default). |
| Format zip | |
| compression | The value is either "store" or "deflate" to indicate how the following entries should be compressed. Note that this setting is ignored for directories, symbolic links, and other special entries. |
| compression-level | The value is interpreted as a decimal integer specifying the compression level. Values between 0 and 9 are supported. A compression level of 0 switches the compression method to "store", other values will enable "deflate" compression with the given level. |
| encryption | Enable encryption using traditional zip encryption. |
| encryption=type | Use type as encryption type. Supported values are "zipcrypt" (traditional zip encryption), "aes128" (WinZip AES-128 encryption) and "aes256" (WinZip AES-256 encryption). |
| experimental | This boolean option enables or disables experimental Zip features that may not be compatible with other Zip implementations. |
| fakecrc32 | This boolean option disables CRC calculations. All CRC fields are set to zero. It should not be used except for testing purposes. |
| hdrcharset | The value is used as a character set name that will be used when translating file names. |
| zip64 |
Zip64 extensions provide additional file size information
for entries larger than 4 GiB.
They also provide extended file offset and archive size information
when archives exceed 4 GiB.
By default, the Zip writer selectively enables these extensions only as needed.
In particular, if the file size is unknown, the Zip writer will
include Zip64 extensions to guard against the possibility that the
file might be larger than 4 GiB.
Setting this boolean option will force the writer to use Zip64 extensions even for small files that would not otherwise require them. This is primarily useful for testing. Disabling this option with !zip64 will force the Zip writer to avoid Zip64 extensions: It will reject files with size greater than 4 GiB, it will reject any new entries once the total archive size reaches 4 GiB, and it will not use Zip64 extensions for files with unknown size. In particular, this can improve compatibility when generating archives where the entry sizes are not known in advance. |
a = archive_write_new(); archive_write_add_filter_gzip(a); archive_write_set_format_iso9660(a); archive_write_set_options(a, "boot=kernel.img,compression=9"); archive_write_open_filename(a, filename, blocksize);
| ARCHIVE_WRITE_OPTIONS (3) | January 31, 2020 |
| Main index | Section 3 | Options |
Please direct any comments about this manual page service to Ben Bullock. Privacy policy.
| “ | This philosophy, in the hands of amateurs, leads to inexplicably mind-numbing botches like the existence of two programs, “head” and “tail,” which print the first part or the last part of a file, depending. Even though their operations are duals of one another, “head” and “tail” are different programs, written by different authors, and take different options! | ” |
| — The Unix Haters' handbook | ||