Manual Pages  — curs_color

start_color, has_colors, can_change_color, init_pair, init_color, init_extended_pair, init_extended_color, color_content, pair_content, extended_color_content, extended_pair_content, reset_color_pairs, COLOR_PAIR, PAIR_NUMBER - curses color manipulation routines

SYNOPSIS DESCRIPTION Overview Color Rendering CONSTANTS VARIABLES COLORS COLOR_PAIRS FUNCTIONS start_color has_colors can_change_color init_pair init_extended_pair init_color init_extended_color color_content extended_color_content pair_content extended_pair_content reset_color_pairs PAIR_NUMBER COLOR_PAIR RETURN VALUE NOTES PORTABILITY SEE ALSO

#include <curses.h>

int start_color(void);

bool has_colors(void);
bool can_change_color(void);

int init_pair(short pair, short f, short b);
int init_color(short color, short r, short g, short b);
/* extensions */
int init_extended_pair(int pair, int f, int b);
int init_extended_color(int color, int r, int g, int b);

int color_content(short color, short *r, short *g, short *b);
int pair_content(short pair, short *f, short *b);
/* extensions */
int extended_color_content(int color, int *r, int *g, int *b);
int extended_pair_content(int pair, int *f, int *b);

/* extensions */
void reset_color_pairs(void);

int COLOR_PAIR(int n);
PAIR_NUMBER(attrs);

curses supports color attributes on terminals with that capability. To use these routines start_color must be called, usually right after initscr. Colors are always used in pairs (referred to as color-pairs). A color-pair consists of a foreground color (for characters) and a background color (for the blank field on which the characters are displayed). A programmer initializes a color-pair with the routine init_pair. After it has been initialized, COLOR_PAIR(n) can be used to convert the pair to a video attribute.

If a terminal is capable of redefining colors, the programmer can use the routine init_color to change the definition of a color. The routines has_colors and can_change_color return TRUE or FALSE, depending on whether the terminal has color capabilities and whether the programmer can change the colors. The routine color_content allows a programmer to extract the amounts of red, green, and blue components in an initialized color. The routine pair_content allows a programmer to find out how a given color-pair is currently defined.

The curses library combines these inputs to produce the actual foreground and background colors shown on the screen:

»	per-character video attributes (e.g., via waddch),
»	the window attribute (e.g., by wattrset), and
»	the background character (e.g., wbkgdset).

Per-character and window attributes are usually set by a parameter containing video attributes including a color pair value. Some functions such as wattr_set use a separate parameter which is the color pair number.

The background character is a special case: it includes a character value, just as if it were passed to waddch.

The curses library does the actual work of combining these color pairs in an internal function called from waddch:

»	If the parameter passed to waddch is blank, and it uses the special color pair 0, » curses next checks the window attribute. » If the window attribute does not use color pair 0, curses uses the color pair from the window attribute. » Otherwise, curses uses the background character.
»	If the parameter passed to waddch is not blank, or it does not use the special color pair 0, curses prefers the color pair from the parameter, if it is nonzero. Otherwise, it tries the window attribute next, and finally the background character.

Some curses functions such as wprintw call waddch. Those do not combine its parameter with a color pair. Consequently those calls use only the window attribute or the background character.

In <curses.h> the following macros are defined. These are the standard colors (ISO-6429). curses also assumes that COLOR_BLACK is the default background color for all terminals.

      COLOR_BLACK
      COLOR_RED
      COLOR_GREEN
      COLOR_YELLOW
      COLOR_BLUE
      COLOR_MAGENTA
      COLOR_CYAN
      COLOR_WHITE

Some terminals support more than the eight (8) ``ANSI'' colors. There are no standard names for those additional colors.

is initialized by start_color to the maximum number of colors the terminal can support.

is initialized by start_color to the maximum number of color pairs the terminal can support.

The start_color routine requires no arguments. It must be called if the programmer wants to use colors, and before any other color manipulation routine is called. It is good practice to call this routine right after initscr. start_color does this:

»	It initializes two global variables, COLORS and COLOR_PAIRS (respectively defining the maximum number of colors and color-pairs the terminal can support).
»	It initializes the special color pair 0 to the default foreground and background colors. No other color pairs are initialized.
»	It restores the colors on the terminal to the values they had when the terminal was just turned on.
»	If the terminal supports the initc (initialize_color) capability, start_color initializes its internal table representing the red, green, and blue components of the color palette.
	The components depend on whether the terminal uses CGA (aka ``ANSI'') or HLS (i.e., the hls (hue_lightness_saturation) capability is set). The table is initialized first for eight basic colors (black, red, green, yellow, blue, magenta, cyan, and white), using weights that depend upon the CGA/HLS choice. For ``ANSI'' colors the weights are 680 or 0 depending on whether the corresponding red, green, or blue component is used or not. That permits using 1000 to represent bold/bright colors. After the initial eight colors (if the terminal supports more than eight colors) the components are initialized using the same pattern, but with weights of 1000. SVr4 uses a similar scheme, but uses 1000 for the components of the initial eight colors.
	start_color does not attempt to set the terminal's color palette to match its built-in table. An application may use init_color to alter the internal table along with the terminal's color.

These limits apply to color values and color pairs. Values outside these limits are not legal, and may result in a runtime error:

»	COLORS corresponds to the terminal database's max_colors capability, (see terminfo(5)).
»	color values are expected to be in the range 0 to COLORS-1, inclusive (including 0 and COLORS-1).
»	a special color value -1 is used in certain extended functions to denote the default color (see use_default_colors(3X)).
»	COLOR_PAIRS corresponds to the terminal database's max_pairs capability, (see terminfo(5)).
»	legal color pair values are in the range 1 to COLOR_PAIRS-1, inclusive.
»	color pair 0 is special; it denotes ``no color''.
	Color pair 0 is assumed to be white on black, but is actually whatever the terminal implements before color is initialized. It cannot be modified by the application.

The has_colors routine requires no arguments. It returns TRUE if the terminal can manipulate colors; otherwise, it returns FALSE. This routine facilitates writing terminal-independent programs. For example, a programmer can use it to decide whether to use color or some other video attribute.

The can_change_color routine requires no arguments. It returns TRUE if the terminal supports colors and can change their definitions; other, it returns FALSE. This routine facilitates writing terminal-independent programs.

The init_pair routine changes the definition of a color-pair. It takes three arguments: the number of the color-pair to be changed, the foreground color number, and the background color number. For portable applications:

»	The first argument must be a legal color pair value. If default colors are used (see use_default_colors(3X)) the upper limit is adjusted to allow for extra pairs which use a default color in foreground and/or background.
»	The second and third arguments must be legal color values.

If the color-pair was previously initialized, the screen is refreshed and all occurrences of that color-pair are changed to the new definition.

As an extension, ncurses allows you to set color pair 0 via the assume_default_colors(3X) routine, or to specify the use of default colors (color number -1) if you first invoke the use_default_colors(3X) routine.

Because init_pair uses signed shorts for its parameters, that limits color-pairs and color-values to 32767 on modern hardware. The extension init_extended_pair uses ints for the color-pair and color-value, allowing a larger number of colors to be supported.

The init_color routine changes the definition of a color. It takes four arguments: the number of the color to be changed followed by three RGB values (for the amounts of red, green, and blue components).

»	The first argument must be a legal color value; default colors are not allowed here. (See the section Colors for the default color index.)
»	Each of the last three arguments must be a value in the range 0 through 1000.

When init_color is used, all occurrences of that color on the screen immediately change to the new definition.

Because init_color uses signed shorts for its parameters, that limits color-values and their red, green, and blue components to 32767 on modern hardware. The extension init_extended_color uses ints for the color value and for setting the red, green, and blue components, allowing a larger number of colors to be supported.

The color_content routine gives programmers a way to find the intensity of the red, green, and blue (RGB) components in a color. It requires four arguments: the color number, and three addresses of shorts for storing the information about the amounts of red, green, and blue components in the given color.

»	The first argument must be a legal color value, i.e., 0 through COLORS-1, inclusive.
»	The values that are stored at the addresses pointed to by the last three arguments are in the range 0 (no component) through 1000 (maximum amount of component), inclusive.

Because color_content uses signed shorts for its parameters, that limits color-values and their red, green, and blue components to 32767 on modern hardware. The extension extended_color_content uses ints for the color value and for returning the red, green, and blue components, allowing a larger number of colors to be supported.

The pair_content routine allows programmers to find out what colors a given color-pair consists of. It requires three arguments: the color-pair number, and two addresses of shorts for storing the foreground and the background color numbers.

»	The first argument must be a legal color value, i.e., in the range 1 through COLOR_PAIRS-1, inclusive.
»	The values that are stored at the addresses pointed to by the second and third arguments are in the range 0 through COLORS, inclusive.

Because pair_content uses signed shorts for its parameters, that limits color-pair and color-values to 32767 on modern hardware. The extension extended_pair_content uses ints for the color pair and for returning the foreground and background colors, allowing a larger number of colors to be supported.

The extension reset_color_pairs tells ncurses to discard all of the color-pair information which was set with init_pair. It also touches the current- and standard-screens, allowing an application to switch color palettes rapidly.

PAIR_NUMBER(attrs) extracts the color value from its attrs parameter and returns it as a color pair number.

Its inverse COLOR_PAIR(n) converts a color pair number to an attribute. Attributes can hold color pairs in the range 0 to 255. If you need a color pair larger than that, you must use functions such as attr_set (which pass the color pair as a separate parameter) rather than the legacy functions such as attrset.

The routines can_change_color and has_colors return TRUE or FALSE.

All other routines return the integer ERR upon failure and an OK (SVr4 specifies only ``an integer value other than ERR'') upon successful completion.

X/Open defines no error conditions. SVr4 does document some error conditions which apply in general:

»	This implementation will return ERR on attempts to use color values outside the range 0 to COLORS-1 (except for the default colors extension), or use color pairs outside the range 0 to COLOR_PAIRS-1.
	Color values used in init_color must be in the range 0 to 1000.
	An error is returned from all functions if the terminal has not been initialized.
	An error is returned from secondary functions such as init_pair if start_color was not called.
»	SVr4 does much the same, except that it returns ERR from pair_content if the pair was not initialized using init_pairs and it returns ERR from color_content if the terminal does not support changing colors.
	This implementation does not return ERR for either case.

Specific functions make additional checks:

init_color
	returns an error if the terminal does not support this feature, e.g., if the initialize_color capability is absent from the terminal description.
start_color
	returns an error if the color table cannot be allocated.

In the ncurses implementation, there is a separate color activation flag, color palette, color pairs table, and associated COLORS and COLOR_PAIRS counts for each screen; the start_color function only affects the current screen. The SVr4/XSI interface is not really designed with this in mind, and historical implementations may use a single shared color palette.

Setting an implicit background color via a color pair affects only character cells that a character write operation explicitly touches. To change the background color used when parts of a window are blanked by erasing or scrolling operations, see curs_bkgd(3X).

Several caveats apply on older x86 machines (e.g., i386, i486) with VGA-compatible graphics:

»	COLOR_YELLOW is actually brown. To get yellow, use COLOR_YELLOW combined with the A_BOLD attribute.
»	The A_BLINK attribute should in theory cause the background to go bright. This often fails to work, and even some cards for which it mostly works (such as the Paradise and compatibles) do the wrong thing when you try to set a bright ``yellow'' background (you get a blinking yellow foreground instead).
»	Color RGB values are not settable.

This implementation satisfies XSI Curses's minimum maximums for COLORS and COLOR_PAIRS.

The init_pair routine accepts negative values of foreground and background color to support the use_default_colors(3X) extension, but only if that routine has been first invoked.

The assumption that COLOR_BLACK is the default background color for all terminals can be modified using the assume_default_colors(3X) extension.

This implementation checks the pointers, e.g., for the values returned by color_content and pair_content, and will treat those as optional parameters when null.

X/Open Curses does not specify a limit for the number of colors and color pairs which a terminal can support. However, in its use of short for the parameters, it carries over SVr4's implementation detail for the compiled terminfo database, which uses signed 16-bit numbers. This implementation provides extended versions of those functions which use short parameters, allowing applications to use larger color- and pair-numbers.

The reset_color_pairs function is an extension of ncurses.