| Main index | Section 3 | Options |
#include <bsnmp/snmpmod.h>
Modules may depend on each other an hence must be loaded in the correct order. The dependencies are listed in the corresponding manual pages.
Upon loading a module the SNMP daemon expects the module file to a export a global symbol config. This symbol should be a variable of type struct snmp_module:
typedef enum snmpd_proxy_err (*proxy_err_f)(struct snmp_pdu *, void *,
const struct asn_oid *, const struct sockaddr *, socklen_t,
enum snmpd_input_err, int32_t);
struct snmp_module {
const char *comment;
int (*init)(struct lmodule *, int argc, char *argv[]);
int (*fini)(void);
void (*idle)(void);
void (*dump)(void);
void (*config)(void);
void (*start)(void);
proxy_err_f proxy;
const struct snmp_node *tree;
u_int tree_size;
void (*loading)(const struct lmodule *, int);
};
This structure must be statically initialized and its fields have the following functions:
| comment | |
| This is a string that will be visible in the module table. It should give some hint about the function of this module. | |
| init | |
| This function is called upon loading the module. The module pointer should be stored by the module because it is needed in other calls and the argument vector will contain the arguments to this module from the daemons command line. This function should return 0 if everything is ok or an UNIX error code (see errno(3)). Once the function returns 0, the fini function is called when the module is unloaded. | |
| fini | |
| The module is unloaded. This gives the module a chance to free resources that are not automatically freed. Be sure to free all memory, because daemons tend to run very long. This function pointer may be NULL if it is not needed. | |
| idle | |
| If this function pointer is not NULL, the function pointed to by it is called whenever the daemon is going to wait for an event. Try to avoid using this feature. | |
| dump | |
| Whenever the daemon receives a SIGUSR1 it dumps it internal state via syslog(3). If the dump field is not NULL it is called by the daemon to dump the state of the module. | |
| config | |
| Whenever the daemon receives a SIGHUP signal it re-reads its configuration file. If the config field is not NULL it is called after reading the configuration file to give the module a chance to adapt to the new configuration. | |
| start | |
| If not NULL this function is called after successful loading and initializing the module to start its actual operation. | |
| proxy | |
| If the daemon receives a PDU and that PDU has a community string whose community was registered by this module and proxy is not NULL than this function is called to handle the PDU. | |
| tree | |
| This is a pointer to the node array for the MIB tree implemented by this module. | |
| tree_size | |
| This is the number of nodes in tree. | |
| loading | |
| If this pointer is not NULL it is called whenever another module was loaded or unloaded. It gets a pointer to that module and a flag that is 0 for unloading and 1 for loading. | |
When everything is ok, the daemon merges the module's MIB tree into its current global tree, calls the modules init() function. If this function returns an error, the modules MIB tree is removed from the global one and the module is unloaded. If initialization is successful, the modules start() function is called. After it returns the loaded() functions of all modules (including the loaded one) are called.
When the module is unloaded, its MIB tree is removed from the global one, the communities, request id ranges, running timers and selected file descriptors are released, the fini() function is called, the module file is unloaded and the loaded() functions of all other modules are called.
The helper macros assume, that the table is organized as a TAILQ (see queue(3) and each structure contains a struct asn_oid that is used as index. For simple tables with only a integer or unsigned index, an alternate form of the macros is available, that presume the existence of an integer or unsigned field as index field.
The macros have name of the form
{INSERT,FIND,NEXT}_OBJECT_{OID,INT}[_LINK[_INDEX]]
The INSERT_*() macros are used in the SET operation to insert a new table row into the table. The FIND_*() macros are used in the GET operation to find a specific row in the table. The NEXT_*() macros are used in the GETNEXT operation to find the next row in the table. The last two macros return a pointer to the row structure if a row is found, NULL otherwise. The macros *_OBJECT_OID_*() assume the existence of a struct asn_oid that is used as index, the macros *_OBJECT_INT_*() assume the existence of an unsigned integer field that is used as index.
The macros *_INDEX() allow the explicit naming of the index field in the parameter INDEX, whereas the other macros assume that this field is named index. The macros *_LINK_*() allow the explicit naming of the link field of the tail queues, the others assume that the link field is named link. Explicitly naming the link field may be necessary if the same structures are held in two or more different tables.
The arguments to the macros are as follows:
| PTR | |
| A pointer to the new structure to be inserted into the table. | |
| LIST | |
| A pointer to the tail queue head. | |
| LINK | |
| The name of the link field in the row structure. | |
| INDEX | |
| The name of the index field in the row structure. | |
| OID | |
| Must point to the var field of the value argument to the node operation callback. This is the OID to search for. | |
| SUB | |
| This is the index of the start of the table index in the OID pointed to by OID. This is usually the same as the sub argument to the node operation callback. | |
get_ticks() - start_tick
struct systemg {
u_char *descr;
struct asn_oid object_id;
u_char *contact;
u_char *name;
u_char *location;
uint32_t services;
uint32_t or_last_change;
};
#define COMM_INITIALIZE 0 #define COMM_READ 1 #define COMM_WRITE 2
community is set to COMM_INITIALIZE while the assignments in the configuration file are processed. To COMM_READ or COMM_WRITE when the community strings for the read-write or read-only community are found in the incoming PDU.
Modules can define additional communities. This may be necessary to provide transport proxying (a PDU received on one communication link is proxied to another link) or to implement non-UDP access points to SNMP. A new community is defined with the function comm_define(). It takes the following parameters:
| priv | |
| This is an integer identifying the community to the module. Each module has its own namespace with regard to this parameter. The community table is indexed with the module name and this identifier. | |
| descr | |
| This is a string providing a human readable description of the community. It is visible in the community table. | |
| mod | |
| This is the module defining the community. | |
| str | |
| This is the initial community string. | |
The function returns a globally unique community identifier. If a SNMPv1 or SNMPv2 PDU is received who's community string matches, this identifier is set into the global community.
The function comm_string() returns the current community string for the given community.
All communities defined by a module are automatically released when the module is unloaded.
struct snmpd_usmstat {
uint32_t unsupported_seclevels;
uint32_t not_in_time_windows;
uint32_t unknown_users;
uint32_t unknown_engine_ids;
uint32_t wrong_digests;
uint32_t decrypt_errors;
};
bsnmpd_get_usm_stats()
returns a pointer to the global structure containing the statistics.
bsnmpd_reset_usm_stats()
clears the statistics of the USM group.
A global list of configured USM users is maintained by the daemon.
struct usm_user {
struct snmp_user suser;
uint8_t user_engine_id[SNMP_ENGINE_ID_SIZ];
uint32_t user_engine_len;
char user_public[SNMP_ADM_STR32_SIZ];
uint32_t user_public_len;
int32_t status;
int32_t type;
SLIST_ENTRY(usm_user) up;
};
This structure represents an USM user. The daemon only responds to SNMPv3 PDUs
with user credentials matching an USM user entry in its global list.
If a SNMPv3 PDU is received, whose security model is USM, the global
usm_user
is set to point at the user entry that matches the credentials contained in
the PDU.
However, the daemon does not create or remove USM users, it gives an interface
to external loadable module(s) to manage the list.
usm_new_user()
adds an user entry in the list, and
usm_delete_user()
deletes an existing entry from the list.
usm_flush_users()
is used to remove all configured USM users.
usm_first_user()
will return the first user in the list, or
NULL
if the list is empty.
usm_next_user()
will return the next user of a given entry if one exists, or
NULL.
The list is sorted according to the USM user name and Engine ID.
usm_find_user()
returns the USM user entry matching the given
engine
and
uname
or
NULL
if an user with the specified name and engine id is not present in the list.
The scalar statistics of the Management Target group are held in the global variable snmpd_target_stats:
struct snmpd_target_stats {
uint32_t unavail_contexts;
uint32_t unknown_contexts;
};
bsnmpd_get_target_stats()
returns a pointer to the global structure containing the statistics.
Three global lists of configured management target addresses, parameters and notifications respectively are maintained by the daemon.
struct target_address {
char name[SNMP_ADM_STR32_SIZ];
uint8_t address[SNMP_UDP_ADDR_SIZ];
int32_t timeout;
int32_t retry;
char taglist[SNMP_TAG_SIZ];
char paramname[SNMP_ADM_STR32_SIZ];
int32_t type;
int32_t socket;
int32_t status;
SLIST_ENTRY(target_address) ta;
};
This structure represents a SNMPv3 Management Target address. Each time a SNMP
TRAP is send the daemon will send the Trap to all active Management Target
addresses in its global list.
struct target_param {
char name[SNMP_ADM_STR32_SIZ];
int32_t mpmodel;
int32_t sec_model;
char secname[SNMP_ADM_STR32_SIZ];
enum snmp_usm_level sec_level;
int32_t type;
int32_t status;
SLIST_ENTRY(target_param) tp;
};
This structure represents the information used to generate SNMP messages to the
associated SNMPv3 Management Target addresses.
struct target_notify {
char name[SNMP_ADM_STR32_SIZ];
char taglist[SNMP_TAG_SIZ];
int32_t notify_type;
int32_t type;
int32_t status;
SLIST_ENTRY(target_notify) tn;
};
This structure represents Notification Tag entries - SNMP notifications are sent
to the Target address for each entry in the Management Target Address list that
has a tag matching the specified tag in this structure.
The daemon does not create or remove entries in the Management Target group lists, it gives an interface to external loadable module(s) to manage the lists. target_new_address() adds a target address entry, and target_delete_address() deletes an existing entry from the target address list. target_activate_address() creates a socket associated with the target address entry so that SNMP notifications may actually be send to that target address. target_first_address() will return a pointer to the first target address entry in the list, while target_next_address() will return a pointer to the next target address of a given entry if one exists. target_new_param() adds a target parameters' entry, and target_delete_param() deletes an existing entry from the target parameters list. target_first_param() will return a pointer to the first target parameters' entry in the list, while target_next_param() will return a pointer to the next target parameters of a given entry if one exists. target_new_notify() adds a notification target entry, and target_delete_notify() deletes an existing entry from the notification target list. target_first_notify() will return a pointer to the first notification target entry in the list, while target_next_notify() will return a pointer to the next notification target of a given entry if one exists. target_flush_all() is used to remove all configured data from the three global Management Target Group lists.
A request id range is allocated with reqid_allocate(). The arguments are: the size of the range and the module allocating the range. For example, the call
id = reqid_allocate(1000, module);
allocates a range of 1000 request ids. The function returns the request id range identifier or 0 if there is not enough identifier space. The function reqid_base() returns the lowest request id in the given range.
Request id are allocated starting at the lowest one linear throughout the range. If the client application may have a lot of outstanding request the range must be large enough so that an id is not reused until it is really expired. reqid_next() returns the sequentially next id in the range.
The function reqid_istype() checks whether the request id reqid is within the range identified by type. The function reqid_type() returns the range identifier for the given reqid or 0 if the request id is in none of the ranges.
The function fd_select() causes the callback function func to be called with the file descriptor fd and the user argument uarg whenever the file descriptor fd can be read or has a close condition. If the file descriptor is not in non-blocking mode, it is set to non-blocking mode. If the callback is not needed anymore, fd_deselect() may be called with the value returned from fd_select(). All file descriptors selected by a module are automatically deselected when the module is unloaded.
To temporarily suspend the file descriptor registration fd_suspend() can be called. This also causes the file descriptor to be switched back to blocking mode if it was blocking prior the call to fd_select(). This is necessary to do synchronous input on a selected socket. The effect of fd_suspend() can be undone with fd_resume().
Function snmp_input_start() decodes the PDU, searches the community, and sets the global this_tick. It returns one of the following error codes:
| SNMPD_INPUT_OK | Everything ok, continue with processing. |
| SNMPD_INPUT_FAILED | The PDU could not be decoded, has a wrong version or an unknown community string. |
| SNMPD_INPUT_VALBADLEN | A SET PDU had a value field in a binding with a wrong length field in an ASN.1 header. |
| SNMPD_INPUT_VALRANGE | A SET PDU had a value field in a binding with a value that is out of range for the given ASN.1 type. |
| SNMPD_INPUT_VALBADENC | A SET PDU had a value field in a binding with wrong ASN.1 encoding. |
| SNMPD_INPUT_TRUNC | The buffer appears to contain a valid begin of a PDU, but is too short. For streaming transports this means that the caller must save what he already has and trying to obtain more input and reissue this input to the function. For datagram transports this means that part of the datagram was lost and the input should be ignored. |
The function snmp_input_finish() does the other half of processing: if snmp_input_start() did not return OK, tries to construct an error response. If the start was OK, it calls the correct function from bsnmpagent(3) to execute the request and depending on the outcome constructs a response or error response PDU or ignores the request PDU. It returns either SNMPD_INPUT_OK or SNMPD_INPUT_FAILED. In the first case a response PDU was constructed and should be sent.
The function snmp_output() takes a PDU and encodes it.
The function snmp_send_port() takes a PDU, encodes it and sends it through the given port (identified by the transport and the index in the port table) to the given address.
The function
snmp_send_trap()
sends a trap to all trap destinations.
The arguments are the
oid
identifying the trap and a NULL-terminated list of
struct snmp_value
pointers that are to be inserted into the trap binding list.
snmp_pdu_auth_access()
verifies whether access to the object IDs contained in the
pdu
should be granted or denied, according to the configured View-Based Access
rules.
ip
contains the index of the first varbinding to which access was denied, or 0 if
access to all varbindings in the PDU is granted.
The following functions are used for OCTET STRING scalars, either NUL terminated or not:
| string_save() | |
| should be called for SNMP_OP_SET. value and ctx are the respamp;.amp; arguments to the node callback. valp is a pointer to the pointer that holds the current value and req_size should be -1 if any size of the string is acceptable or a number larger or equal zero if the string must have a specific size. The function saves the old value in the scratch area (note, that any initial value must have been allocated by malloc(3)), allocates a new string, copies over the new value, NUL-terminates it and sets the new current value. | |
| string_commit() | |
| simply frees the saved old value in the scratch area. | |
| string_rollback() | |
| frees the new value, and puts back the old one. | |
| string_get() | |
| is used for GET or GETNEXT. The function | |
| string_get_max() | |
| can be used instead of string_get() to ensure that the returned string has a certain maximum length. If len is -1, the length is computed via strlen(3) from the current string value. If the current value is NULL, a OCTET STRING of zero length is returned. | |
| string_free() | |
| must be called if either rollback or commit fails to free the saved old value. | |
The following functions are used to process scalars of type IP-address:
| ip_save() | |
| Saves the current value in the scratch area and sets the new value from valp. | |
| ip_commit() | |
| Does nothing. | |
| ip_rollback() | |
| Restores the old IP address from the scratch area. | |
| ip_get() | |
| Retrieves the IP current address. | |
The following functions handle OID-typed variables:
| oid_save() | |
| Saves the current value in the scratch area by allocating a struct asn_oid with malloc(3) and sets the new value from oid. | |
| oid_commit() | |
| Frees the old value in the scratch area. | |
| oid_rollback() | |
| Restores the old OID from the scratch area and frees the old OID. | |
| oid_get() | |
| Retrieves the OID | |
| index_decode() | |
| Decodes the index part of the OID. The parameter oid must be a pointer to the var field of the value argument of the node callback. The sub argument must be the index of the start of the index in the OID (this is the sub argument to the node callback). code is the index expression (parameter idx to the node callback). These parameters are followed by parameters depending on the syntax of the index elements as follows: | |
| INTEGER | int32_t * expected as argument. |
| COUNTER64 | uint64_t * expected as argument. Note, that this syntax is illegal for indexes. |
| OCTET STRING | A u_char ** and a size_t * expected as arguments. A buffer is allocated to hold the decoded string. |
| OID | A struct asn_oid * is expected as argument. |
| IP ADDRESS | A u_int8_t * expected as argument that points to a buffer of at least four byte. |
| COUNTER, GAUGE, TIMETICKS | |
| A u_int32_t expected. | |
| NULL | No argument expected. |
| index_compare() | |
| compares the current variable with an OID. oid1 and sub come from the node callback arguments value->var and sub resp. oid2 is the OID to compare to. The function returns -1, 0, +1 when the variable is lesser, equal, higher to the given OID. oid2 must contain only the index part of the table column. | |
| index_compare_off() | |
| is equivalent to index_compare() except that it takes an additional parameter off that causes it to ignore the first off components of both indexes. | |
| index_append() | |
| appends OID src beginning at position sub to dst. | |
| index_append_off() | |
| appends OID src beginning at position off to dst beginning at position sub + off. | |
| SNMPMOD (3) | December 19, 2010 |
| Main index | Section 3 | Options |
Please direct any comments about this manual page service to Ben Bullock. Privacy policy.
| “ | Using Unix is the computing equivalent of listening only to music by David Cassidy | ” |
| — Rob Pike | ||