timerfd_create(2) manual page

The timerfd system calls operate on timers, identified by special timerfd file descriptors. These calls are analogous to timer_create(), timer_gettime(), and timer_settime() per-process timer functions, but use a timerfd descriptor in place of timerid.

All timerfd descriptors possess traditional file descriptor semantics; they may be passed to other processes, preserved across fork(2), and monitored via kevent(2), poll(2), or select(2). When a timerfd descriptor is no longer needed, it may be disposed of using close(2).

timerfd_create()

Initialize a timerfd object and return its file descriptor. The clockid argument specifies the clock used as a timing base and may be:

CLOCK_REALTIME Increments as a wall clock should.

CLOCK_MONOTONIC Increments monotonically in SI seconds.

The flags argument may contain the result of or'ing the following values:

TFD_CLOEXEC The newly generated file descriptor will close-on-exec.

TFD_NONBLOCK Do not block on read/write operations.

timerfd_gettime()

Retrieve the current state of the timer denoted by fd. The result is stored in curr_value as a struct itimerspec. The it_value and it_interval members of curr_value represent the relative time until the next expiration and the interval reload value last set by timerfd_settime(), respectively.

timerfd_settime()

Update the timer denoted by fd with the struct itimerspec in new_value. The it_value member of new_value should contain the amount of time before the timer expires, or zero if the timer should be disarmed. The it_interval member should contain the reload time if an interval timer is desired.
The previous timer state will be stored in old_value given old_value is not NULL.
The flags argument may contain the result of or'ing the following values:

TFD_TIMER_ABSTIME Expiration will occur at the absolute time provided in new_value. Normally, new_value represents a relative time compared to the timer's clockid clock.

TFD_TIMER_CANCEL_ON_SET

If clockid has been set to CLOCK_REALTIME and the realtime clock has experienced a discontinuous jump, then the timer will be canceled and the next read(2) will fail with ECANCELED.

File operations have the following semantics:

read(2)

Transfer the number of timer expirations that have occurred since the last successful read(2) or timerfd_settime() into the output buffer of size uint64_t. If the expiration counter is zero, read(2) blocks until a timer expiration occurs unless TFD_NONBLOCK is set, where EAGAIN is returned.

poll(2)

The file descriptor is readable when its timer expiration counter is greater than zero.

ioctl(2)

FIOASYNC int

A non-zero input will set the FASYNC flag. A zero input will clear the FASYNC flag.

FIONBIO int

A non-zero input will set the FNONBLOCK flag. A zero input will clear the FNONBLOCK flag.

[`EINVAL`]
	The specified clockid is not supported.
[`EINVAL`]
	The provided flags are invalid.
[`EMFILE`]
	The per-process descriptor table is full.
[`ENFILE`]
	The system file table is full.
[`ENOMEM`]
	The kernel failed to allocate enough memory for the timer.

[`EBADF`]
	The provided fd is invalid.
[`EFAULT`]
	The addresses provided by curr_value, new_value, or old_value are invalid.
[`EINVAL`]
	The provided fd is valid, but was not generated by `timerfd_create()`.

[`EINVAL`]
	The provided flags are invalid.
[`EINVAL`]
	A nanosecond field in the new_value argument specified a value less than zero, or greater than or equal to 10^9.
[`ECANCELED`]
	The timer was created with the clock ID `CLOCK_REALTIME`, was configured with the `TFD_TIMER_CANCEL_ON_SET` flag, and the system realtime clock experienced a discontinuous change without being read.

[`EAGAIN`]
	The timer's expiration counter is zero and the timerfd object is set for non-blocking I/O.
[`ECANCELED`]
	The timer was created with the clock ID `CLOCK_REALTIME`, was configured with the `TFD_TIMER_CANCEL_ON_SET` flag, and the system realtime clock experienced a discontinuous change.
[`EINVAL`]
	The size of the read buffer is not large enough to hold the uint64_t sized timer expiration counter.

Manual Pages — TIMERFD

NAME

CONTENTS

LIBRARY

SYNOPSIS

DESCRIPTION

RETURN VALUES

ERRORS

SEE ALSO

STANDARDS

HISTORY

`timerfd_create()`
	Initialize a timerfd object and return its file descriptor. The clockid argument specifies the clock used as a timing base and may be:
`CLOCK_REALTIME`	Increments as a wall clock should.
`CLOCK_MONOTONIC`	Increments monotonically in SI seconds.

`TFD_CLOEXEC`	The newly generated file descriptor will close-on-exec.
`TFD_NONBLOCK`	Do not block on read/write operations.

`timerfd_gettime()`
	Retrieve the current state of the timer denoted by fd. The result is stored in curr_value as a `struct itimerspec`. The it_value and it_interval members of curr_value represent the relative time until the next expiration and the interval reload value last set by `timerfd_settime()`, respectively.
`timerfd_settime()`
	Update the timer denoted by fd with the `struct itimerspec` in new_value. The it_value member of new_value should contain the amount of time before the timer expires, or zero if the timer should be disarmed. The it_interval member should contain the reload time if an interval timer is desired. The previous timer state will be stored in old_value given old_value is not `NULL`. The flags argument may contain the result of or'ing the following values:

`TFD_TIMER_ABSTIME`	Expiration will occur at the absolute time provided in new_value. Normally, new_value represents a relative time compared to the timer's clockid clock.
`TFD_TIMER_CANCEL_ON_SET`
	If clockid has been set to `CLOCK_REALTIME` and the realtime clock has experienced a discontinuous jump, then the timer will be canceled and the next read(2) will fail with `ECANCELED`.

read(2)
	Transfer the number of timer expirations that have occurred since the last successful read(2) or `timerfd_settime()` into the output buffer of size uint64_t. If the expiration counter is zero, read(2) blocks until a timer expiration occurs unless `TFD_NONBLOCK` is set, where `EAGAIN` is returned.
poll(2)
	The file descriptor is readable when its timer expiration counter is greater than zero.
ioctl(2)

`FIOASYNC int`
	A non-zero input will set the FASYNC flag. A zero input will clear the FASYNC flag.
`FIONBIO int`
	A non-zero input will set the FNONBLOCK flag. A zero input will clear the FNONBLOCK flag.