tail head cat sleep
QR code linking to this page
Main index Section 4
Go to:
Options

Manual Pages  — FELIX

NAME

felix – driver for Microchip Ocelot Felix switch

CONTENTS

SYNOPSIS

To compile this driver into the kernel the following lines must be present in the kernel configuration file:

options SOC_NXP_LS device pci device fdt device mdio device enetc device etherswitch device felix

DESCRIPTION

The felix driver provides a management interface to Microchip Ocelot Felix switch (VSC9959) found in NXP LS1028A SoC. It is a PCI device, part of the larger ENETC root complex. The driver is using etherswitch(4) framework.

This driver supports only dot1q vlan. dot1q support port base addtag, striptag, dropuntagged, dropuntagged.

EXAMPLES

Configure dot1q vlan by etherswitchcfg command.

    # etherswitchcfg config vlan_mode dot1q

Configure port 5 is tagging port.

    # etherswitchcfg port5 addtag

Disable port 5 is tagging port.

    # etherswitchcfg port5 -addtag

SEE ALSO

etherswitch(4), etherswitchcfg(8)

HISTORY

The felix device driver first appeared in FreeBSD 14.0 .

AUTHORS

The felix driver was written by Kornel Duleba (mindal@semihalf.com) and Lukasz Hajec (lha@semihalf.com)

FELIX (4) June 21, 2021
tail head cat sleep
QR code linking to this page
Main index Section 4
Go to:
Options

Please direct any comments about this manual page service to Ben Bullock. Privacy policy.