tail head cat sleep
QR code linking to this page

Manual Pages  — MPSUTIL

NAME

mpsutil, mprutil – Utility for managing LSI Fusion-MPT 2/3 controllers

CONTENTS

SYNOPSIS


mpsutil version
mpsutil [-u unit] show adapter
mpsutil [-u unit] show adapters
mpsutil [-u unit] show all
mpsutil [-u unit] show cfgpage page [num] [addr]
mpsutil [-u unit] show devices
mpsutil [-u unit] show enclosures
mpsutil [-u unit] show expanders
mpsutil [-u unit] show iocfacts
mpsutil [-u unit] set ncq [enable|disable]
mpsutil [-u unit] flash save [firmware|bios] [file]
mpsutil [-u unit] flash update [firmware|bios] file

DESCRIPTION

The mpsutil utility can be used to display or modify various parameters on LSI Fusion-MPS 2 controllers.

The mprutil utility can be used to display or modify various parameters on LSI Fusion-MPS 3 controllers.

The mprutil utility behave identically to mpsutil. (same program)

Each invocation of mpsutil consists of zero or more global options followed by a command. Commands may support additional optional or required arguments after the command.

Currently one global option is supported:
-u unit
  unit specifies the unit of the controller to work with. If no unit is specified, then unit 0 is used.

The mpsutil utility supports several different groups of commands. The first group of commands provide information about the controller. The second group of commands are used to manager controller-wide operations.

The informational commands include:
version
  Displays the version of mpsutil.
show adapter
  Displays information about the controller such as the model number or firmware version.
show adapters
  Displays a summary of all adapters.
show all
  Displays all devices, expanders and enclosures.
show devices
  Displays all devices.
show expanders
  Displays all expanders.
show enclosures
  Displays all enclosures.
show iocfacts
  Displays IOC Facts messages.
show cfgpage page [num ][addr]
  Dump raw config page in hex.

Controller management commands include:
set ncq [enable|disable ]
  Enables or disables NCQ in the NVRAM of the card.
flash save [firmware|bios ][file]
  Save the firmware or bios from the controller into a local file. If no file is specified then the file will be named firmware or bios.
flash update [firmware|bios ]file
  Replace the firmware or bios from the controller with the one specified via file.

SEE ALSO

mpr(4), mps(4)

HISTORY

The mpsutil utility first appeared in FreeBSD 11.0 .

TODO

Flash operations (save/update) are not supported on big-endian architectures.


MPSUTIL (8) May 7, 2021

tail head cat sleep
QR code linking to this page


Please direct any comments about this manual page service to Ben Bullock. Privacy policy.

Unix is the answer, but only if you phrase the question very carefully.
— Belinda Asbell