Main index | Section 4 | Options |
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_ixgbe_load="YES"
For questions related to hardware requirements, refer to the documentation supplied with your Intel 10GbE adapter. All hardware requirements listed apply to use with FreeBSD .
Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames. The maximum MTU size for Jumbo Frames is 16114.
This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8).
ixgbe%d: Unable to allocate bus resource: memory | A fatal initialization error has occurred. |
ixgbe%d: Unable to allocate bus resource: interrupt | A fatal initialization error has occurred. |
ixgbe%d: watchdog timeout -- resetting | The device has stopped responding to the network, or there is a problem with the network connection (cable). |
If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to <Mt freebsd@intel.com>.
IXGBE (4) | January 30, 2019 |
Main index | Section 4 | Options |
Please direct any comments about this manual page service to Ben Bullock. Privacy policy.