tail head cat sleep
QR code linking to this page

Manual Pages  — URE

NAME

ure – RealTek RTL8152 USB to Fast Ethernet controller driver

CONTENTS

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: device uhci device ohci device usb device miibus device uether device ure

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

if_ure_load="YES"

DESCRIPTION

The ure driver provides support for USB Ethernet adapters based on the RealTek RTL8152 USB to Fast Ethernet controller chip.

The RTL8152 contains an integrated Fast Ethernet MAC, which supports both 10 and 100Mbps speeds in either full or half duplex.

The ure driver supports the following media types:
autoselect Enable auto selection of the media type and options. The user can manually override the auto selected mode by adding media options to the /etc/rc.conf file.
10baseT/UTP
  Set 10Mbps operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes.
100baseTX Set 100Mbps (Fast Ethernet) operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes.

The ure driver supports the following media options:
full-duplex
  Force full duplex operation.
half-duplex
  Force half duplex operation.

For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

ure%d: watchdog timeout A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired.

SEE ALSO

arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8)

AUTHORS

The ure driver was written by Kevin Lo <Mt kevlo@FreeBSD.org>.

URE (4) December 1, 2015

tail head cat sleep
QR code linking to this page


Please direct any comments about this manual page service to Ben Bullock. Privacy policy.