tail head cat sleep
QR code linking to this page

Manual Pages  — SND_SBC

NAME

snd_sbc, snd_sb16, snd_sb8 – Creative Sound Blaster ISA and compatible bridge device driver

CONTENTS

DEPRECATION NOTICE

This driver is scheduled for removal prior to the release of FreeBSD 14.0 .

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: device sound device snd_sbc device snd_sb16 device snd_sb8

Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):

snd_sbc_load="YES"
snd_sb16_load="YES"
snd_sb8_load="YES"

Non-PnP cards require the following lines in device.hints(5):

hint.sbc.0.at="isa"
hint.sbc.0.port="0x220"
hint.sbc.0.irq="5"
hint.sbc.0.drq="1"
hint.sbc.0.flags="0x15"

DESCRIPTION

The snd_sbc bridge driver allows the generic audio driver sound(4) to attach to Creative Sound Blaster ISA (mostly SB16 or SB8, known as SoundBlaster Pro) compatible audio cards.

The value of flags specifies the secondary DMA channel. If the secondary DMA channel is C, set the flags to (C | 0x10). For a sound card without the secondary DMA channel, the flags should be set to zero.

HARDWARE

The snd_sbc driver supports the following sound cards:

DIAGNOSTICS

sb_dspwr(XX) timed out. A command to the DSP has timed out. Check the I/O port configuration.
bad irq XX (5/7/9/10 valid) The IRQ given to the driver is not valid.

SEE ALSO

sound(4)

HISTORY

The snd_sbc device driver first appeared in FreeBSD 4.0 .

AUTHORS

Seigo Tanimura <Mt tanimura@r.dl.itc.u-tokyo.ac.jp>

SND_SBC (4) March 19, 2022

tail head cat sleep
QR code linking to this page


Please direct any comments about this manual page service to Ben Bullock. Privacy policy.