| Main index | Section 4 | Options |
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_ure_load="YES"
The ure driver supports the following media types:
| autoselect | Enable auto selection of the media type and options. The user can manually override the auto selected mode by adding media options to the /etc/rc.conf file. |
| 10baseT/UTP | |
| Set 10Mbps operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes. | |
| 100baseTX | Set 100Mbps (Fast Ethernet) operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes. |
| 1000baseTX | Set 1000baseTX (Gigabit Ethernet) operation over twisted pair. The Realtek gigE chips support 1000Mbps in full-duplex mode only. |
| 2500base-T | Set 2500Base-T operation over twisted pair. The Realtek 8156/8156B chips support 2500Mbps in full-duplex mode only. |
The ure driver supports the following media options for 10/100 operation:
| full-duplex | |
| Force full-duplex operation. | |
| half-duplex | |
| Force half-duplex operation. | |
For more information on configuring this device, see ifconfig(8).
Model: | Speed (Mbps): |
Realtek RTL8156/RTL8156B/RTL8156BG | 10, 100, 1000, and 2500 |
Realtek RTL8153/RTL8153B | 10, 100, and 1000 |
Realtek RTL8152 | 10 and 100 |
Realtek RTL8168/8169/8110/8211 via rgephy(4) | 10, 100, and 1000 |
| ure%d: watchdog timeout | A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired. |
| URE (4) | April 8, 2025 |
| Main index | Section 4 | Options |
Please direct any comments about this manual page service to Ben Bullock. Privacy policy.
| “ | Did you know that 7/5 people don't know how to use fractions? | ” |