tail head cat sleep
QR code linking to this page
Main index Section 4
Go to:
Options

Manual Pages  — UVSCOM

NAME

uvscom – USB support for SUNTAC Slipper U VS-10U serial adapters driver

CONTENTS

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file: device usb device ucom device uvscom

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): 

uvscom_load="YES"

HARDWARE

The uvscom driver supports the following adapters:

DESCRIPTION

The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters.

The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

FILES

/dev/ttyU* for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock
  corresponding callin initial-state and lock-state devices

/dev/cuaU* for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock
  corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The uvscom driver first appeared in FreeBSD and later in NetBSD This manual page was adopted from NetBSD by Tom Rhodes <Mt trhodes@FreeBSD.org> in April 2002.
UVSCOM (4) April 26, 2017
tail head cat sleep
QR code linking to this page
Main index Section 4
Go to:
Options

Please direct any comments about this manual page service to Ben Bullock. Privacy policy.