|Main index||Section 5||日本語||Deutsch||Options|
On a normally configured system this file should not be necessary. The only name server to be queried will be on the local machine, the domain name is determined from the host name, and the domain search path is constructed from the domain name.
The different configuration options are:
|Internet address (in dot notation) of a name server that the resolver should query. Up to MAXNS (currently 3) name servers may be listed, one per keyword. If there are multiple servers, the resolver library queries them in the order listed. If no nameserver entries are present, the default is to use the name server on the local machine. (The algorithm used is to try a name server, and if the query times out, try the next, until out of name servers, then repeat trying all the name servers until a maximum number of retries are made).|
|domain||Local domain name. Most queries for names within this domain can use short names relative to the local domain. If no domain entry is present, the domain is determined from the local host name returned by gethostname(3); the domain part is taken to be everything after the first ‘.’. Finally, if the host name does not contain a domain part, the root domain is assumed.|
Search list for host-name lookup.
The search list is normally determined from the local domain name;
by default, it contains only the local domain name.
This may be changed by listing the desired domain search path
keyword with spaces or tabs separating
Most resolver queries will be attempted using each component
of the search path in turn until a match is found.
Note that this process may be slow and will generate a lot of network
traffic if the servers for the listed domains are not local,
and that queries will time out if no server is available
for one of the domains.
The search list is currently limited to six domains with a total of 256 characters.
Sortlist allows addresses returned by gethostbyname to be sorted.
A sortlist is specified by IP address netmask pairs.
The netmask is
optional and defaults to the natural netmask of the net.
The IP address
and optional network pairs are separated by slashes.
Up to 10 pairs may
sortlist 188.8.131.52/255.255.240.0 184.108.40.206
Options allows certain internal resolver variables to be modified.
The syntax is
options option ...
where option is one of the following:
|debug||sets RES_DEBUG in _res.options.|
|usevc||sets RES_USEVC to use TCP instead of UDP for queries.|
|ndots:n||sets a threshold for the number of dots which must appear in a name given to res_query() (see resolver(3)) before an initial absolute query will be made. The default for n is "1", meaning that if there are any dots in a name, the name will be tried first as an absolute name before any search list elements are appended to it.|
|timeout:n||sets the initial amount of time the resolver will wait for a response from a remote name server before retrying the query via a different name server. The resolver may wait longer during subsequent retries of the current query since an exponential back-off is applied to the timeout value. Measured in seconds, the default is RES_TIMEOUT, the allowed maximum is RES_MAXRETRANS (see <resolv.h>).|
|attempts:n||sets the number of times the resolver will send a query to each of its name servers before giving up and returning an error to the calling application. The default is RES_DFLRETRY, the allowed maximum is RES_MAXRETRY (see <resolv.h>).|
|tells the resolver not to attempt to resolve a top level domain name, that is, a name that contains no dots. Use of this option does not prevent the resolver from obeying the standard domain and search rules with the given name.|
|The resolver checks the modification time of /etc/resolv.conf every n seconds. If /etc/resolv.conf has changed, it is automatically reloaded. The default for n is two seconds. Setting it to zero disables the file check.|
Options may also be specified as a space or tab separated list using the RES_OPTIONS environment variable.
The domain and search keywords are mutually exclusive. If more than one instance of these keywords is present, the last instance will override.
The keyword and value must appear on a single line, and the keyword (for example, nameserver) must start the line. The value follows the keyword, separated by white space.
|The file resolv.conf resides in /etc.|
|RESOLVER (5)||August 16, 2018|
|Main index||Section 5||日本語||Deutsch||Options|
|“||This philosophy, in the hands of amateurs, leads to inexplicably mind-numbing botches like the existence of two programs, “head” and “tail,” which print the first part or the last part of a file, depending. Even though their operations are duals of one another, “head” and “tail” are different programs, written by different authors, and take different options!||”|
|— The Unix Haters' handbook|